EasyManua.ls Logo

STS Safe Series - Technical Data

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version No. 1.0
Page 41 of 51 User Manual STS Safe Series all Equipment 2023 V1.1
12.0 Safe-PocketSource
12.1 Technical Data
STS Safe-MiniSource (variable)
The STS Safe-Pocket Source (variable) is a simulated radiation source for use with the
Survey-Safe, Safe-EPD & Dosi-Safe range of instruments.
The Safe-Pocket Source (variable) is a variable activity source with a near isotropic field
pattern, its small size makes it easily hidden for carrying out training such as lost source
recovery.
Dimensions (mm)
104H
65W
24D
Weight (KG)
0.20KG
Construction
Moulded Plastic Case
Controls
Membrane with on/off key and LED
10 position rotary switch
Power Level
10 variable levels settable from
rotary switch
Battery
2 x AAA 1.5V cells
THIS UNIT CANNOT BE
MAINS RECHARGED
Battery life 10 hrs+
Emitter
STS radio frequency Detector
3 pole emitter for 360
degree Isotropic field
Low Battery LED
Green on
Red – Low Battery
Operating & Storage Temperature
Operating temp 0 to +30C
Storage temp 0C to
+40C
Warm up time
10 seconds from switch on to ready.
Available Meters
Survey-Safe
Dosi-Safe
Safe-EPD
Additional Information
The STS Safe-PocketSource is not designed to be intrinsically safe and therefore should not
be used in hazardous environments. The units are not waterproof and contain delicate and
sensitive electronics which may be caused to fail if exposed to moisture. Units should be
stored in a clean and dry environment, batteries should be removed if storing for more than
4 weeks.
Instrument response will be affected by environmental conditions such as the presence of
large reflective surfaces, substantial metal structures and variable wall thicknesses.