Version No. 1.0
Page 48 of 51 User Manual STS Safe Series all Equipment 2023 V1.1
15.2 Operator Controls
The Available operator buttons are displayed on the rear of the case.
To enter the menu select the up arrow – to change the adjustable alarm thresholds enter the
required menu and then use the Audio button to scroll through the available options.
The unit is pre-programmed with a fixed 0.05uSv background.
The unit has an autoscaling display that will automatically change from uSv to mSv when the
counts go over 100 uSv. The maximum count rate displayed is 10mSv
To Next Page
Loading...