11
Superset
®
- Horizontal Settings
[ 1]
• Unit faces you and white lettering on face is right-side up
• Align with an edge or line - wait 10 seconds
• Press HOLD button until [ 1] appears
[ 2]
• Rotate unit so it faces away from you, the lettering
should still be right-side up
• Align with same edge or line - wait 10 seconds
• Press HOLD button until [ 2] appears
[ 3]
• Roll unit so it faces you, the lettering should now be
upside-down
• Align with same edge or line - wait 10 seconds
• Press HOLD button until [ 3] appears
[ 4]
• Rotate unit so it faces away from you, the lettering
should still be upside-down
• Align with same edge or line - wait 10 seconds
• Press HOLD button until [ 4] appears
You have completed one half of Superset
®
(continued on next page)
To Next Page
Loading...