13
Your Pro 360 has been Superset
®
back to manufacturer's spec's.
Canceling Superset
®
You may cancel Superset
®
at any time during the process by turning the unit off.
Maintenance
The Pro 360 is designed to stand up to the rigors of industrial use. The following tips will
ensure a long service life:
• Use the "end-for-end" accuracy test daily to make sure the unit is in calibration. If it is
not, recalibrate it immediately with Superset®.
• Clean the Pro 360 with mild liquid soap and a damp cloth. Never immerse in water.
• Do not use solvents directly on any of the Pro 360 plastic surfaces.
• Store the Pro 360 away from extreme temperature: Never below -20° C (-4° F) or above
65° C (149° F).
To Next Page
Loading...