9
•Rotate the unit end-for-end so the display is
facing away from you. Be sure to set the
Pro 360 in exactly the same spot, and wait
10 seconds before reading the angle that's
displayed.
•Now roll the unit toward you so that the
display is facing you, but the lettering on the
face of the unit is upside down. Wait 10
seconds, and note the angle on the display.
• Finally, rotate the unit end-for-end so the
display is facing away from you (the
lettering should still be upside-down). Wait
10 seconds and note the angle on the
display.
• If any of the four measurements varies from any other by more than 0.1°,
you must recalibrate (Superset
®
) your unit before using it further.
To Next Page
Loading...