SECTION 3 - INTERIOR
Heat Valve Control Bezel For 1956
Heat Valve Control Bezel For 1957
Switches - Heat Valve Control
The Heat Valve control knob is
the only one that is not a
toggle. The knob attaches to a
metal piece that slides along a
slot in the bezel. The bezel
has the word ON stamped on
the left end and the work OFF
stamped on the right end. The
lettering is painted black.
The Heat Valve control bezel
was changed for the 1957
model year. The long slot was
moved from the top edge of the
bezel to the bottom edge. The
word “HEAT” was added to the
center, between the OFF and
ON wording.
This bezel will not work on the 1956 Hawk models unless it is mounted upside down.
Last Update - July 2, 2018
Page 79
To Next Page
Loading...
