E-7
REPEAT ALL:
Press the MODE BUTTON (#8) again and “REP ALL” appears on the display. All tracks on
the CD will play in order and will repeat continuously until you stop playback or change the
mode.
RANDOM PLAY:
Press the MODE BUTTON (#8) again and “RND” appears on the display. All tracks on the CD
will play in random order until you stop playback or change the mode.
CANCELLING THE REPEAT MODES:
Press the MODE BUTTON (#8) again or until all the symbols on the display turn off.
SKIP AND SEARCH MODE (COMMERCIAL CD and MP3 CD)
1. During Play or Pause mode, press the BUTTON (#1) or BUTTON (#2) to go to the
next track or go back to the beginning of the current track.
2. During play mode or Pause mode, press and hold the + BUTTON (#1) or BUTTON
(#2) to search within the current track with audible high-speed playback.
PROGRAM PLAY MODE (COMMERCIAL CD and MP3 CD)
This function allows the tracks to be played in a programmed sequence. Programs can be set
in STOP mode.
1. Tap the PROG BUTTON (#8) once. The "P-01 XX" will show on the LCD DISPLAY (#5).
The track number “XX” will blink to prompt for input.
2. Tap the or BUTTONS (#1/#2) repeatedly to select the track to be programmed.
(For a MP3 CD, the folder number will show on the left of the LCD DISPLAY)
3. Tap the PROG BUTTON (#8) again to store selection. The Program Channel No. will
change to “P-02” and the track number “XX” will blink to prompt for input.
4. You may repeat steps 2 - 3 to program up to 24 tracks for CD or 99 tracks for MP3 CD.
5. Tap PLAY/PAUSE BUTTON (#7) to start the programmed play.
6. You may repeat the current programmed track or all programmed tracks by pressing the
MODE BUTTON (#8) once or twice at programmed play mode.
7. Tap STOP
BUTTON (#6) once to stop playback.
8. Tap PLAY/PAUSE BUTTON (#7) to resume programmed play.
9. To cancel programmed play, press the STOP BUTTON (#6) twice.
A-B REPEAT PLAYBACK
1. During CD or MP3 CD playback, press REPEAT A-B BUTTON (#9) at the point where you
want to set the starting time of the A-B playback.
“A SEt” is displayed on the LCD DISPLAY (#5) and return to show the track time after
3 seconds.
2. Press REPEAT A-B BUTTON (#9) at the point where you want to set the end time of the
A-B playback.
“On Ab” is displayed on the LCD DISPLAY (#5) and return to show the track time after
3 seconds. “A-B” will display on the upper right corner of the LCD DISPLAY (#5) and the
selected period (A to B) will playback repeatedly.
3. Tap the STOP
BUTTON (#6) to clear the A-B repeat playback setting and stop
playback. Or tap A-B BUTTON (#9) to cancel the A-B repeat and carry on the playback.
To Next Page
Loading...
Need help?
General
