BASS BOOST FUNCTION
Tap the BBS ON/OFF BUTTON (#12) to turn on the BBS to enhance the bass effect of the
music. Tap again to turn off the BBS.
HOLD FUNCTION
To prevent accidental function changes during active use, this unit is fitted with a function
hold. After the unit has been powered on and playing in CD or FM mode, slide the HOLD
ON/OFF SWITCH (#4) to ON position. The hold indicator will light on the LCD DISPLAY (#7).
Slide the HOLD ON/OFF SWITCH (#4) to OFF position to turn off the hold function.
RESETTING THE UNIT
In case of malfunction due to electrostatic discharge, reset the unit by disconnecting the DC
plug of the AC Adapter from the DC IN JACK (#3) and remove the batteries. Wait at least for 3
minutes before reconnecting the DC plug to the DC IN JACK (#3) or insert the batteries.
INSTALLING CAR MOUNT
Attach the magnetic mount to air vent by sliding the vent claw onto a single air vent flap.
There is a metal plate installed inside the back of the unit. Place your CD Player on the magnetic
car mount.
CARE AND MAINTENANCE
1.
Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
2.
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
3.
Keep your unit away from heating appliances and sources of
electrical noise such as fluorescent lamps or motors.
4.
If drop-outs or interruptions occur in the music during CD play,
or if the CD fails to play at all, its bottom surface may require
cleaning. Before playing, wipe the disc from the center outwards
with a good soft cleaning cloth.
To Next Page
Loading...
Need help?
General
