buttons are released, normal playback speed will be resumed immediately.
+10 Control
Press the +10 button to advance the music search by increments of 10 tracks.
REPEAT MODE
Repeat 1
To repeat the current track, tap the REPEAT BUTTON once, the REPEAT INDICATOR
will begin to flash on the LCD display. The track will continue to play until the repeat
function is turned off.
REPEAT FOLDER
If there is more than one folder of MP3 music in your flash-drive, tap the REPEAT BUTTON
repeatedly until the REPEAPT FOLDER indicator appears on the LCD DISPLAY to
repeat playing songs in the selected folder.
Repeat All
To repeat all the tracks, tap the REPEAT BUTTON repeatedly, the REPEAT INDICATOR
will be solid on. All the tracks on the disc will be played repeatedly.
SHUFFLE PLAY
To shuffle tracks in your flash-drive, tap the REPEAT BUTTON repeatedly until the
BLUETOOTH OPERATION
PAIRING A SMARTPHONE OR BLUETOOTH ENABLED DEVICE
The Bluetooth feature enables you to stream and play the digital music on your Bluetooth
enabled device to your unit.
1. Press and hold the POWER
button to turn on the unit. Tap the MODE button
repeatedly to select Bluetooth mode, the indicator “bt” will flash on the LCD display.
5. After successfully pairing and connecting your device with SB3720, the unit will emit a
brief welcome melody and the Bluetooth indicator will change to solid on. You can now
play music from your Bluetooth enabled device wirelessly to the SB3720.
If you want to connect the SB3720 to another external Bluetooth enabled device while
paired with another device, press and hold the /PAIR button for a few seconds to
disconnect the existing connection. The unit will emit two short beeps and Bluetooth
indicator will begin to flash. Repeat steps #3 to #4 above to establish a new pairing.
Rotate the VOLUME CONTROL on the top panel to increase the listening volume
gradually until a comfortable listening level is reached.
SHUFFLE play indiactor appears on the LCD
will be played randomly.
display. All the tracks on the flash drive
6.
To Cancel Repeat/Shuffle Function: Press the REPEAT BUTTON until
REPEAT/SHUFFLE indicator goes off from LCD display.
Programmed USB playback
This unit can be programmed to play up to 99 tracks in USB mode.
7.
8. Press the PLAY/PAUSE BUTTON to control play/pause.
9. Press the SKIP FORWARD BUTTON to skip to the next song and SKIP
BACKWARD BUTTON to skip to the previous song.
3. Press or button to select the track to be programmed. The track number “001”
Notes:
will flash on the LCD DISPLAY to prompt for input.
If you cannot pair the unit with your Bluetooth enabled device, try solving the problem
by turning the unit power off, then power on, and then starting the pairing process again.
The Bluetooth function of the unit will remain paired unless the paired device goes out
of range of 30 feet (10 meters). If the broken link is re-established within 20 seconds,
the SB3720 will reconnect to the current paired device automatically. Otherwise, you
will need to make a manual connection again later.
You may need to turn off the Bluetooth function of the paired external device first before
making a new link.
Refer to manual of your smartphone or external Bluetooth enabled device for correct
Bluetooth operation instructions since it may vary from model to model.
If your Bluetooth enabled device does not support A2DP, it will not play the music
through the SB3720 system even after it is paired and connected successfully.
If you are pairing and connecting your personal computer to the SB3720 using
Bluetooth, you may need to set the SB3720 as your computer’s default sound device.
6. Press the PLAY/PAUSE button to start the programmed play.
7. Press STOP
button once to stop playback.
8. Press the button to resume programmed play.
9. To cancel programmed play, press the STOP button twice.
RE-LINKING TO A SMARTPHONE OR BLUETOOTH ENABLED DEVICE
Even if your smartphone or Bluetooth device is already paired with the SB3720 and with
both Bluetooth functions turned on, they can become unlinked at some point due to
11 12
2. The unit will start in auto connection mode and search for a previously paired device
that is active and in range (30 feet/10 meters). If found, a brief welcome melody will be
heard and the Bluetooth indicator “bt” on the LCD display will change to solid on. If no
active device is found, the unit will switch to interactive pairing mode and the Bluetooth
indicator will continue to flash.
3. To establish a new link, turn on the Bluetooth function of your Bluetooth enabled
device and enable the search or scan feature to find “SB3720” in the list of
discoverable Bluetooth devices. Select the “SB3720” from your available device list
when it appears on its screen and a brief welcome melody will be heard if pairing and
connection is successful. If you are asked for a password, enter “0000”.
4. If no successful pairing and connection is made within 5 minutes, the unit can enter
manual pairing mode. You need to press and hold the /PAIR button until the
Bluetooth indicator flashes to initiate a pairing/connecting request to a new or old
Bluetooth enabled device. Follow step #3 to complete the process.
1. With your flash-drive plugged into USB port, make sure the unit is in stop mode.
2. Press and hold the MEM/M+ button, the PROGRAM Indicator “MEM” will flash and
program Channel Number "P01" will show on the LCD DISPLAY.
4. Tap the MEM button again to store selection. The Program Channel Number will
change to “P02”.
5. You may repeat steps 3 - 4 to program as many as 99 tracks. When the memory is full,
“FUL” will show on the LCD DISPLAY.
To Next Page
Loading...
