Need help?Do you have a question about the Studer A700 and is the answer not in the manual?
General| Type | Reel-to-reel tape deck |
|---|---|
| Heads | 3 (Erase, Record, Playback) |
| Inputs | XLR, RCA |
| Outputs | XLR, RCA |
| Tape Speed | 15 ips / 7.5 ips |
| Reel Size | 10.5 inches |
| Frequency Response | 20 Hz to 20 kHz |
| Wow and Flutter | 0.05% |
Specifies tape speeds and related performance.
Details tape slip characteristics.
Flutter measurement details.
Input impedance and signal levels.
Output impedance and signal levels.
Tone control characteristics.
Description of connections on the panel.
Schematic diagram of the power supply.
Schematic diagram for tape transport control.
General information on mechanism and required tools.
Procedure for removing device panels.
Removing main traverse and controls.
Procedure for removing the power transformer.
Procedure for removing left tape tension sensor.
Procedure for removing the capstan motor.
Procedure for removing spooling motors.
Procedure for removing pinch roller assembly.
Removing spooling and capstan motor controls.
Procedure for removing capstan speed control.
Instructions for re-assembly.
Procedure for removal from audio mixer unit.
Procedure for removing the upper deck plate.
Procedure for removing the audio mixer unit.
To Next Page
