To Next PageTo Next Page
Need help?Do you have a question about the Studer A820 and is the answer not in the manual?
General| Track Formats | 2-track, 4-track |
|---|---|
| Signal to Noise Ratio | 66 dB at 15 ips (without noise reduction) |
| Equalization | NAB, CCIR |
| Heads | 3 (erase, record, playback) |
| Inputs | XLR balanced |
| Outputs | XLR balanced |
| Tape Speed | 3.75, 7.5, 15, and 30 ips |
Provides an overview of the STUDER Autolocator's capabilities and compatibility with various tape recorders.
Lists the available versions of the Autolocator, including desktop and chassis configurations, with part numbers.
Details the step-by-step procedure for connecting the Autolocator to compatible Studer tape recorders.
Explains the fundamental tape transport controls such as Play, Stop, Rewind, and Fast Forward operations.
Details the usage of the numeric keypad for entering specific addresses, values, and memory numbers.
Describes how to activate and use the LAP counter for a secondary, independent tape timing function.
Explains the function of memory keys for storing, recalling, and retrieving tape positions.
Covers commands for positioning the tape at specific addresses and executing rollback functions.
Details accessing stored memory locations and controlling variable tape speed (VARISPEED).
Explains the setup and execution of continuous or single tape loops using specific command keys.
Describes executing loops with automatic drop-in/drop-out, including preroll and postroll programming.
