Need help?Do you have a question about the Studer Revox B77 and is the answer not in the manual?
Details protection from heat/humidity, handling, and warranty terms.
Explains manual structure, basic info, step-by-step instructions, and technical details.
Details the controls for tape movement and transport functions.
Details the controls used for playback and monitoring.
Details the controls used for recording audio signals.
Details power switch, speed selection, reel size, and editor controls (1-5).
Explains volume control (12) and left/right channel level indicators (13, 14).
Details REC L/R selectors (18, 22) and recording lights (19, 23).
Explains input level adjustment (20, 21) and saturation indicators (24, 25).
Details AC power inlet (42) and line voltage selector (41).
Details connection for slide projectors and tape drive remote controls (44-46).
Details connecting the AC power and audio cables to the unit.
Details tape loading procedure and selecting tape speed (1-4).
Details REC, STOP, PAUSE functions (11, 10, 6) and mono/stereo recording.
Details recording process for the left channel using selectors and controls (18, 20, 27).
Explains stereo recording setup using input and REC selectors (27, 28, 18, 22).
Explains recording level intensity and its effect on sound quality.
Explains monitor modes (STEREO, LEFT, RIGHT, MONO) for playback and recording.
Details playback setup using TAPE/INPUT switch and VOLUME control.
Details recording a lesson on one channel and your voice on the other.
Explains recording mono on two channels simultaneously for various applications.
Details steps for first, second, and subsequent multiplay recordings.
Details adding echo to left or right channel recordings.
Explains the infrared sensor system for automatic tape stopping.
Details the use of the tape guide, cutter, and splicing tabs for editing.
Advises using high-quality tapes and proper storage conditions.
Details cleaning procedures for tape heads and guides.
Explains connecting the remote and its functions, including timer mode.
Details timer modes (OFF, PLAY, REC) for automatic operation.
Lists common errors like no sound, incorrect speed, or no playback and their fixes.
Details tape speeds, wow/flutter, reel size, and winding time.
Lists common errors like no sound, incorrect speed, or no playback and their fixes.
Lists audio input/output levels, impedance, and connector types.
Details signal-to-noise ratio, crosstalk, erase depth, and input/output specs.
Details power supply, fuse rating, weight, and physical dimensions.
Illustrates track arrangements for different machine configurations.
To Next Page
General
