Need help?Do you have a question about the Studer AJ SERIES and is the answer not in the manual?
General| THD | < 3% |
|---|---|
| Output Voltage | 230 VAC |
| AC Output Voltage | 230 VAC |
| Protection | Overload, Short circuit |
| Frequency Range | 50 Hz or 60 Hz (selectable) |
| Communication Interface | RS232 |
| Cooling Method | Fan Cooling |
| Humidity | Max. 95% non-condensing |
| Altitude | Up to 2000m |
Overview of the AJ series sine wave inverters for industrial and domestic needs.
Crucial safety advice regarding assembly, high voltage contact, and internal manipulation of the inverter.
Guidelines for installing the inverter, including proper placement and securing using screws.
Detailed instructions for connecting consumer devices and the battery, emphasizing correct wiring, polarity, and potential sparks.
Explains the ON/OFF switch, green indicator states, and acoustic indicators for failures.
Details the function of the stand-by system, low power consumption mode, and adjustment of the detection level.
Lists common failures like low battery, overheating, overload, and their consequences and solutions.
Guidance on basic maintenance, cleaning, and what to do in case of malfunction.
Covers the warranty period, conditions for voiding it, and exclusions for improper use or damage.
Disclaimer from Studer INNOTEC regarding installation, use, and liability for damages.
Describes the functions and connection requirements for the JT8 remote control accessory.
Comprehensive table detailing technical data, specifications, and dimensions for various AJ series models.
Explains the function of the built-in solar charger, its indicators, and wiring instructions for solar generators.
To Next Page
