2.1 Key Features
DSP • Configurable DSP Core via provided configuration tool
• Supported Channel Count:
Core 300: 300 MEQ+
Core 600: 600 MEQ+
• Supported Bus Count
Up to 768 summation busses
• Tie line patching does not consume DSP (Direct input to output patching)
I/O • Sampling Frequencies: 48 kHz, 96 kHz
• Ethernet tunneling via A-Link for connected D23m devices
• I/O Configuration
4 x A-Link, 1536 Channels each
1 x Ethernet connection for Ethernet tunneling via A-Link
Communication • 2 Ethernet Network Ports on Main Board
• Communication via UDP Broadcast or UDP Multicast (configurable)
• Static IP Addresses (configurable)
• Static Node identifiers (configurable)
Redundancy • System Level redundancy - Multiple cores in parallel
• Redundant Network connections
Service and Maintenance • VGA Port for external monitor
• USB Ports
• Web Interface for configuration and software updates
• Bootable USB stick for complete factory re-imaging (requires USB Key-
board and Monitor connected)
To Next Page
