Core Version As a big change to the SCoreLive-version of the Session Configuration Tool,
here, the Infinity Core Version has to be chosen.
This is an important setting. The Core Version must match the actual Core
HW, as the load balancing of the Session Configuration Tool is set to this
specific core size. This means that when this setting is not matching the actua
HW core, the VMC configuration might not run at all.
By going to the Tree- or Shared-view and by right-clicking on the parameter
Core Version, the appropriate version can be chosen.
N-X channels There is a new N-X channel/bus structure for the Infinity Core. The N-X bus
now requires a master channel, as other busses do (e.g. Aux or Mst). This N-X
master channel can be chosen amongst all other channel types. It is available
in mono and stereo. So each N-X bus needs a N-X master channel.
Config Sync There is a process (which can be started with a batch file) that needs to run on
the Vista desk, in order to be able to load new configs into the Infinity Core.
More details Further details see in the Vista Operating Instructions, chapter 6, Session
Configuration Tool.
To Next Page
Loading...
