Studer Innotec SA
Quick guide RCC-02/-03
Quick guide V 6.1.0 3
1 INTRODUCTION
This quick guide contains information relating to the functioning of the RCC-02 and RCC-03 remote
controls. The RCC remote control can be used to control Xtender inverter/chargers, VarioTrack
and VarioString MPPT solar charge controllers and their accessories.
1.1 CONTENTS: RCC REMOTE CONTROL
1 Micro SD card;
for recording statistics,
updates, backups or
restoration of configurations or
adjustments.
Contains the complete RCC
product manual in
EN, FR, DE and ES
2 LIMITATION OF RESPONSIBILITY
The placement, commissioning, use, maintenance and servicing of the RCC remote control
cannot be monitored by Studer Innotec. For this reason, Studer Innotec assumes no responsibility
or liability for damage, costs or losses resulting from an installation that does not conform to the
instructions, from a defective functioning or from deficient maintenance.
The use of Studer Innotec devices is the responsibility of the customer in all cases. This equipment
is neither designed nor guaranteed to supply installations used for vital medical care or any other
critical installation carrying significant potential damage risks to people or to the environment.
Studer Innotec does not assume any responsibility for the infringement of patent rights or other
rights of third parties that result from using the devices.
The responsibility of Studer Innotec may not, under any circumstances, exceed the amount spent
to purchase the product.
Studer Innotec reserves the right to make modifications to the product without prior notification.
To Next Page
Loading...
Need help?
General