Studer Innotec SA
Quick guide RCC-02/-03
6 V 6.1.0 Quick guide
6 ADJUSTMENT OF THE PARAMETERS
The parameters of your device are divided into several access levels, some protected by
password. A description of the access levels is available in chapter 10.4 of the RCC user manual
available on the SD card delivered with the RCC remote control. A detailed description of each
parameter is available in the same manual.
6.1 CONFIGURATION OF THE RCC (REMOTE CONTROL)
RCC / Xcom-232i parameter description
Choice of the second language
Choice of the third language
Choice of the fourth language
Force remote control to user BASIC level
Datalogger reset when modifying the installation
Erase the 30 oldest log files from the SD card
Save all files (system backup)
Restore all files (system recovery)
Apply configuration files (masterfile)
Separator of the .csv files
Advanced backup functions
Save and restore RCC files
Create RCC configuration file (masterfile)
Load RCC configuration file (masterfile)
Save and restore Xtender files
Create Xtender configuration file (masterfile)
Load Xtender configuration file (masterfile)
Load Xtender parameters preset
Save and restore BSP files
To Next Page
Loading...
Need help?
General