Studer Innotec SA
Quick guide RCC-02/-03
Quick guide V 6.1.0 7
RCC / Xcom-232i parameter description
Create BSP configuration file (masterfile)
Load BSP configuration file (masterfile)
Save and restore VarioTrack files
Save VarioTrack parameters
Load VarioTrack parameters
Create VarioTrack configuration file (masterfile)
Load VarioTrack configuration file (masterfile)
Save and restore VarioString files
Save VarioString parameters
Load VarioString parameters
Create VarioString configuration file (masterfile)
Load VarioString configuration file (masterfile)
MODIFICATION OF ACCESS LEVELS OF MANY PARAMETERS
Change all parameters access level to:
Restore default access level of all parameters
Backlight switch off after
Red backlight flashing on Xtender off and faulty
EXTENDED AND SPECIAL FUNCTIONS
Choice of standard display
Displaying of configuration assistant on startup
Come back to standard display after
Visibility of the transitory messages
Remote control acoustic alarm duration
Switching ON and OFF of system on level "VIEW ONLY"
Reset of all the remotes control
Reset all devices of the system
Test of the modem's GPRS signal level (Xcom-GSM)
Clear info {17019} Maximum time interval between two
scom requests
Xcom Portal watchdog activation
Delay before Xcom Portal watchdog forces reconnection
To Next Page
Loading...
Need help?
General