Studer Innotec SA
Quick guide RCC-02/-03
Quick guide V 6.1.0 9
Xtender parameter description
Minimal delay between cycles
End of absorption triggered with current
Current limit to quit the absorption phase
Maximal frequency of absorption control
Minimal delay since last absorption
Equalization before absorption phase
Number of cycles before an equalization
Equalization with fixed interval
Weeks between equalizations
End of equalization triggered with current
Current threshold to end equalization phase
Floating duration before reduced floating
Periodic absorption phase
Periodic absorption allowed
Periodic absorption voltage
Reduced floating duration before periodic absorption
Periodic absorption duration
AC voltage increase according to battery voltage
Max AC voltage increase with battery voltage
Inverter frequency increase when battery full
Inverter frequency increase according to battery voltage
Speed of voltage or frequency change in function of battery
Time delay between standby pulses
Solsafe presence Energy source at AC-Out side
To Next Page
Loading...
Need help?
General