Studiologic VMK-88 plus - Page 15

VMK88-MANUAL___________________________SLIDERS / KNOBS
________________________________________13________________________________________
Edit Slider : S1
Polarity : DN>UP
To adjust the Polarity value
use the DE dial
SCREEN
CHANGE
Edit
6) PRESS PAGE UP
In this example select DN>UP
When the Slider is in the DOWN
position it will send a Value of O.
when UP a Value of 127.
Storage
Enter
SCREEN
CHANGE
Edit
7) PRESS STORAGE
You are now going to save your
program to a user preset.
Storage
Enter
Store Parameters
No Yes
Storage
Enter
Store Parameters
No Yes
NOTE:
Storage and Enter buttons now
function as No or Yes buttons.
8) PRESS ENTER(Yes)
SCREEN
CHANGE
Edit
In this example we’ll choose Yes.
Storage
Enter
Preset Num. : 1
Name :
CURSOR will blink
10) PRESS ENTER(Yes)
SCREEN
CHANGE
Edit
You will now return to the
Preset page.
You have completed your first
programing session! You will have
to repeat these steps in order to
program more sliders and knobs.
Storage
Enter
Preset Num. : 1
Name :
9) PRESS STORAGE
SCREEN
CHANGE
Edit
The blinking cursor indicates
preset number selection.
Storage
Enter
Are You Sure?
No Yes