Stulz CyberRow - CyberRow System Design; Model Nomenclature

4
STULZ CyberRow
MODEL NOMENCLATURE AND FEATURES
Direct expansion CyberRow systems provide efficient cooling through one of three different methods
of heat rejection. Remote air cooled (A) systems shall utilize an outdoor condenser to reject heat, while
water cooled (W) and glycol cooled (G) systems shall utilize a brazed plate heat exchanger mounted
inside the CyberRow cabinet. The STULZ E² controller allows for independent valve and fan control
so the unit can adjust immediately, and precisely, to varying heat loads and optimize energy efficiency.
Features
•Highestcoolingcapacitiesintheindustry
•12”and24"cabinetwidths
•3ECFans:IndependentlyandinnitelyadjustableECfansensuremaximumefciency
•Usedincontainment,openarchitecture,andhotspotreductionapplications
•AdaptstobothhighandlowdensityITenvironments
•Widerangeofcoolingcapacitiesavailable
•100%frontandrearserviceaccess
•Adaptstoallmajormanufacturers'racksandrackcontainmentsystems
•SeamlessintegrationwithallBMSplatforms
•pLANlinkto8unitswithoutaBMS
•Highairowwithlessnoise
•Builtinredundancyandcapacityassistfunctions
•Topandbottompipingoptions
•CastersandLevelingFeetincluded
•Indooruseonly
•Installationonraisedandnon-raisedoors
CyberRow Row-Based System
Nominal Capacity in
1,000 of BTU/H
CyberRow System
AR = Remote (Split) Air Cooled
W = Water Cooled
G = Glycol Cooled
CRS -_ _ _-_-_
FC = Free Cooling
AWS = Alternate Water Source
Model Nomenclature