To Next Page
D
Dennis SuarezSep 7, 2025
How to fix low air flow in Stulz Air Conditioner?
- Jjade16Sep 7, 2025
If you're experiencing low air flow with your Stulz Air Conditioner, check and replace the air filter.
How to fix low air flow in Stulz Air Conditioner?
If you're experiencing low air flow with your Stulz Air Conditioner, check and replace the air filter.
How to fix a dirty filter alarm on Stulz Air Conditioner?
If you receive a 'dirty filter' alarm on your Stulz Air Conditioner, it means the air filter is clogged. Replace the filter to resolve this issue.
What to do if Stulz Air Conditioner shows a high humidity alarm?
If your Stulz Air Conditioner displays a 'high humidity' alarm (if a humidity probe is installed), it could be due to humidity infiltration from outside. Check for any air passages from the outdoors and seal them.
How to solve low temperature alarm on Stulz Air Conditioner?
If you are getting a 'low temperature' alarm on your Stulz Air Conditioner, you should improve the thermal insulation of the room or unit, or add external stand-alone heaters.
What to do for insufficient condenser air flow in Stulz Air Conditioner?
If there's insufficient condenser air flow in your Stulz Air Conditioner, ensure the condenser fan can move freely and clean the condenser and air openings.
How to fix high pressure alarm on Stulz Air Conditioner?
If your Stulz Air Conditioner is showing a 'high pressure' alarm, remove any obstructions near the condenser air discharge and make sure the unit's external panels are correctly closed.
What to do if external temperature is higher than max limit for Stulz Air Conditioner?
If the external temperature is higher than the maximum limit for your Stulz Air Conditioner, change the unit model.
What to do if the LAN cable is not pin-to-pin in Stulz Air Conditioner?
If the LAN cable for your Stulz Air Conditioner is not pin-to-pin, replace it with a pin-to-pin cable.
What to do when Stulz Air Conditioner cooling capacity is lower than heat load?
If the cooling capacity is lower than the heat load in your Stulz Air Conditioner, reduce the heat load or increase the number of units temperature.
What to do if pipes to the air flow switch are clogged in Stulz Air Conditioner?
If the pipes to the air flow switch are clogged or bent in your Stulz Air Conditioner, clean and reposition the plastic pipes.
General| Brand | Stulz |
|---|---|
| Model | WDE Series |
| Category | Air Conditioner |
| Language | English |
