To Next PageTo Next PageWhat to do if the Style selections 76185 flame effect works, but the heater doesn't blow warm air?
If the Style Selections Indoor Fireplace heater doesn't blow warm air, ensure the heater switch is in the 'ON' position; the switch should light up. Also, check that the thermostat is turned to the 'HI' position.
What to do if Style Selections Indoor Fireplace heater doesn’t work, but Power and Heater switches are in the “ON” position and thermostat is set on “HI”?
If your Style Selections Indoor Fireplace heater isn’t working, and the power and heater switches are on with the thermostat set to high, the unit might be in protected status. To resolve this, turn all switches to the 'OFF' position and unplug the unit for 5 minutes. After 5 minutes, plug it back in and operate as usual.
Why switches light up, but no flame effect in Style selections 76185?
If the switches on your Style Selections Indoor Fireplace light up, but there is no flame effect, the bulbs might be broken or loose. Remove the front glass door and check for any broken or loose light bulbs.
What to do if logs glow, flame effect does not work in Style selections 76185 Indoor Fireplace?
If the logs glow, but the flame effect does not work on your Style Selections Indoor Fireplace, open the back of the unit. Check if the spinner is correctly mounted to the rear of the unit. Also, check if the spinning motor is functioning. If the motor isn’t working, contact customer service.
How to fix Style selections 76185 when there is no power and switches do not light up?
If your Style Selections Indoor Fireplace has no power and the switches do not light up, check that the unit is plugged into a standard 120V outlet.
General| Fuel Type | Electric |
|---|---|
| Remote Control | Yes |
| Ventilation Type | Ventless |
| Wattage | 1500W |
| Voltage | 120V |
