LCD Display
EN-2
1. “Scan”
2. “Fog”
3. “speed”
4. “ + Scan”
5. “ ”
6. “ ”
7. “ ”
Continuous measuring mode
Fog mode
Speed finder mode
Flagpole lock mode
Low battery icon
Target centre
Display numerical value. When there is no such
numerical value, four dashes “----” would be displayed.
Display measuring unit. In distance measuring mode
and height finder mode, “M” or “Y” will be displayed. In
speed finder mode, “KM/h” or “M/S” will be displayed.
Operation Guidance
Step 1: Turn on the product
Short press power button to turn on the product and it would enter into
distance measuring mode. The LCD will display as shown in the picture
below.
8. “ ”
To Next Page
Loading...
