2. LCD display:
3. How to operate
● Single distance measuring:
① Aim at target object and short press power button.
② The measuring result would be displayed on the lens.
● Continuous distance measuring:
① Aim at target object and long press the power button. The ‘Scan’ icon
would flash on screen.
② Scan on both sides of the target in a slow, back and forth way. The
numerical value would flash on the lens.
③ Wait till a square bracket appears on the flag icon and the displayed
value becomes stable. This value is the distance to the flagpole.
C. Fog mode
1. Working Principle:
EN-5
To Next Page
Loading...
