Step 2: Adjust the focus
Looking through the eyepiece, rotate the eyepiece clockwise or
counter-clockwise until the view is clearly in focus. By adjusting the
eyepiece, people with far-sighted or short-sighted vision can use this
product without wearing glasses.
Step 3: Mode and Unit Selection
Short press the MODE button to switch mode. Long press the MODE button
to switch unit.
Step 4: Measuring
Note: c equals the speed of light and t equals the amount of time for the
round trip between rangefinder and target.
A. Distance measuring mode
1. Working Principle:
EN-3
Note: In single distance measuring mode, the distance to a discrete point
you targeted would be measured and displayed. In continuous distance
measuring mode, the distances to a continuous line of points you targeted
will be measured and displayed.
d=ct/2
To Next Page
Loading...
