EasyManuals Logo

Sub-Zero 427 Specifications

Sub-Zero 427
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Planning Information
Wine Storage Model 427
Dimensions in parentheses are in
millimeters unless otherwise specified.
7
INTEGRATED PANELS
The dimensions of these panels and stiles are assuming
the Model 427 finishes off at 80" (2032) in height overall
and has a 4" (102) toe kick. If you finish off at 84" (2134)
for instance, you must add 4" (102) additional to the
overall height of the panel and remember to add 4" (102)
to the top rail. Likewise, if you allow for a 6" (152) toe kick
for the Model 427, you must subtract 2" (51) from the
bottom rail.
IMPORTANT NOTE: The toe kick area on the Model 427
cannot be larger than 6" (152) or less than 4" (102). Refer
to toe kick specifications for Integrated Models.
The door panel for Model 427 can grow beyond the 80"
(2032) height to accommodate any size of door as long as
you stay below door panel weight limit of 40 lbs (18 kg)
for solid door and 20 lbs (9 kg) for glass door units. Refer
to upper valance specifications for Integrated Models.
IMPOR
TANT NOTE:
If y
ou are installing Sub-Zero's
optional lock kit on a Model 427, you may have to order
door panels that exceed the 80" (2032) finishing height.
Consult the loc
k installation instructions and see if your
panels will allow for an adequate installation.
The door fr
ame of the unit has pre-drilled holes for our
optional handle hardware. Refer to Hardware Considera-
tions on page 12 for specifics about installing handle
hardw
are on this overlay application.
Refer to the charts and illustrations on the following pages
for specific dimensions for integrating cabinetry for Model
427.
For additional specifications and installation information
specific to Model 427, refer to pages 2–5. Also refer to the
comprehensive installation instructions that are shipped
with each unit.
IMPORTANT NOTE: Wine Storage
models with a solid door are available
a
s a special order and require 90 days
for delivery.
A solid panel must not be
installed on a glass door unit, as
this may cause moisture to form
behind the panel.

Other manuals for Sub-Zero 427

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sub-Zero 427 and is the answer not in the manual?

Sub-Zero 427 Specifications

General IconGeneral
BrandSub-Zero
Model427
CategoryWine Cooler
LanguageEnglish

Related product manuals