PAGE 119
UC SERIES
» Clearing Error Codes
1. Unit must be ON
2. Repair problem
3a.
Press Freezer
WARMER & COLDER keys simultane-
ously for 15 seconds (Model UC-24C ONLY)
3b. Press WARMER & COLDER keys simultaneously for 15
seconds (Models UC-24B/R/RO ONLY)
» Manual Component Activation Mode
(Energizes cooling system for 5 minutes)
1. Unit must be ON
2. Press desired
COLDER & POWER keys simultaneously for
10 seconds
NOTE: After performing the above key strokes (depending on
COLDER key chosen), the following will appear on the LCD.
Temperatures shown are for reference only, actual temperatures
may vary.
--0022
SERVICE (Illuminated)
FF
Temperature of E (Evaporator)
OR
4400
SERVICE (Illuminated) r
Temperature of r (Refrigerator Compartment)
To Next Page
Loading...
