EasyManuals Logo

Sub-Zero 600 Series Information Booklet

Sub-Zero 600 Series
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
PAGE 33
400-2 SERIES - 427R-2 REFRIGERATOR
Service Input Operations
» Auto Model Configuration Mode
If a new main control board is installed during a service call,
double dashes ( - - ) will appear on the LCD indicating the board
must be configured for the model it was installed into.
1. Open bottom drawer.
2. With unit on - Press COLDER or WARMER key to toggle
through model codes, then stop when proper code is dis-
played (See Model Code Table on next page).
3. Press UNIT ON/OFF key to store configuration.
» Manual Entry Model Configuration Mode
If control board configuration needs to be verified or changed:
1. Open bottom drawer.
2. With unit on - Press COLDER and UNIT ON/OFF keys
simultaneously, then release.
3. Press Bell ON/OFF and UNIT ON/OFF keys simultaneous-
ly, then release.
4. Press COLDER or WARMER key to toggle through model
codes, then stop when proper code is displayed (See
Model Code Table on next page).
3. Press UNIT ON/OFF key to store configuration.

Other manuals for Sub-Zero 600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sub-Zero 600 Series and is the answer not in the manual?

Sub-Zero 600 Series Specifications

General IconGeneral
TypeBuilt-In
Energy Star CertifiedYes
Ice MakerYes
LightingLED
Door AlarmYes
Temperature AlarmYes
ConfigurationSide-by-Side
Width36 inches
Height84 inches
Water DispenserYes
ShelvesAdjustable glass shelves

Related product manuals