9
ICE MAKER SYSTEM
T
he
I
CE ON/OFF
k
ey pad, located on the
electronic control panel turns the automatic ice
maker system on and off. When the ice maker
i
s on, the word ICE will be illuminated in the
LCD display.
POWER
The
UNIT ON/OFF
key pad, located on the
electronic control panel will turn off all
electrical power to the unit. This key pad can
be used for shutting down the unit for servicing
or extended vacations.
ALARM FEATURE
All Integrated units have an alarm feature that
will make an audible beeping sound if a door
or drawer is left ajar.
An alarm will sound if the door is left ajar on
the tall unit, or a drawer is left open on either
the tall or base unit. When the alarm is acti-
vated, the bell symbol in the LCD display will
be visible. You can turn the alarm on or off with
the ”
Bell
”
ON/OFF
key pad, or stop it with this
control once the alarm has sounded.
When your alarm is on, the bell symbol will be
illuminated in the LCD display on the electronic
digital contr
ol panel. T
o turn the alar
m of
f,
press the ”
Bell
”
ON/OFF
key pad one time to
make the bell symbol disappear fr
om the
display.
TEMPERATURE DISPLAY
The electronic digital control system can
display temperatures in Fahrenheit (˚F) or
C
elsius (˚C).
To change the temperature display units from
˚F to ˚C or ˚C to ˚F, first turn the unit off then
back on again using the
UNIT ON/OFF
key
pad. Within one minute after turning the unit
back on, press and hold the ”
Bell
”
ON/OFF
key pad. While holding the ”
Bell
”
ON/OFF
key
pad, press and hold the
UNIT ON/OFF
key
pad. Keep both key pads pressed for about 5
seconds until a ˚C or ˚F appears in the LCD
display, then release the key pads. The display
will return back to normal after no key pads
are pressed for 10 seconds.
Use the
COLDER
and
WARMER
key pads to
check the set point range(s) and verify that the
temperature units were changed.
SABBATH MODE (STAR-K)
Sabbath mode is available for the observance
of certain religious holidays. This mode turns
off the lights, ice maker system and door alarm
and prevents them from turning on again.
Normal cooling operations will still take place.
For some Integrated models, an additional
harness kit may be necessar
y to meet Sabbath
mode requirements. Contact your Sub-Zero
dealer or check the Locator section of our
website, subzero.com, for the authorized
service center nearest you.
To put the Integrated unit into Sabbath mode,
the unit must first be turned off with the
UNIT
ON/OFF
key pad. When the unit is off, press
and hold the
UNIT ON/OFF
key pad. The unit
will turn on as soon as the key pad is
depressed. The lights will turn off after holding
the
UNIT ON/OFF
key pad for about 10
seconds. This indicates that the unit has
entered Sabbath mode and the key pad can be
r
eleased.
Sabbath mode can be exited by pr
essing the
UNIT ON/OFF
key pad once.
SUB-ZERO INTEGRATED USE & CARE
To Next Page
Loading...
Need help?
General
