Sub-Zero CBIC-18FI User Manual

6 | English
Opening Dimensions
INTEGRATED MODELS
SUB-ZERO INTEGRATED REFRIGERATION
OPENING DIMENSIONS
COLUMN A B
ICBIC-18FI 457 mm 2134 mm
ICBIC-24R, ICBIC-24FI 610 mm 2134 mm
ICBIC-30RID, ICBIC-30FI 762 mm 2134 mm
ICBIC-36RID 914 mm 2134 mm
TALL A B
ICBIT-30RID, ICBIT-30CIID 762 mm 2134 mm
ICBIT-36CIID 914 mm 2134 mm
DRAWER A B
ICBID-30RP, ICBID-30CI 762 mm 876 mm
ICBID-36CI 914 mm 876 mm
The depth of each integrated model is 610 mm. Allow for
panel thickness when planning the nished opening depth.
Approximately 89 mm of the opening depth may be visible
when the door/drawers are open and should be nished to
match cabinetry. Refer to the illustration below.
DUAL INSTALLATION
When installing two units side by side in a dual installa-
tion, the opening width is the width of the two units added
together. A dual installation kit will be required for this instal-
lation. If a dual installation kit is not specied, a minimum
51 mm ller strip is required between units.
Dual installation kits are available through an authorized
Sub-Zero dealer. For questions regarding the installation,
contact your authorized Sub-Zero dealer.
DETAIL
635 mm
OPENING
DEPTH
A
OPENING WIDTH
635 mm
OPENING DEPTH
B
OPENING
HEIGHT
TOP VIEW
FRONT VIEWSIDE VIEW
89 mm
(TYPICAL)
19 mm
(TYPICAL)
SHADED AREA
SHOULD BE
FINISHED
TO MATCH
CABINETRY

Sub-Zero CBIC-18FI Specifications

General

Brand	Sub-Zero
Model	CBIC-18FI
Category	Refrigerator
Language	English