11-74
Maintenance and service
High mount stop light
0
1. Remove the mounting screw covers by prying the
edge with a flat-head screwdriver.
2. Remove the mounting screws using a Phillips
screwdriver and then remove the high mount stop light
cover.
3. Pull the bulb from the socket. Install a new bulb.
4. Reinstall the cover.
5. Tighten the mounting screws then reinstall the cov-
ers.
NOTE
Other bulbs may be difficult to replace. Have your
SUBARU dealer replace these bulbs if necessary.
HSB091BA
To Next Page
Loading...
