Black plate (178,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
3-56 Instruments and controls
3. Pull the “ /SET” switch toward you
once more to enter the setting mode.
4. The system will notify you of the place
to be selected for approximately 2 sec-
onds.
5. Select one of the registration lines by
operating the “
” or “ ” switch, and then
pull the “
/SET” switch toward you.
6. To overwrite the previous registration,
pull the “
/SET” switch toward you. When
registration is performed the first time, it is
registered directly without a notification.
7. The system will notify you that the
registration is complete for approximately
2 seconds.
NOTE
The driving history can be registered
for the trip meter A or B.
& Car settings
The items in the car settings can be set.
To change the items, operate the “
” or
“
” switch, and then pull the “ /SET”
switch toward you.
! Preparation for car settings
1. Turn the ignition switch to the “ON”
position, and then pull the “
/SET” switch
To Next Page
Loading...
Need help?
General
