Black plate (375,1)
北米Model "A2520BE-A" EDITED: 2015/ 5/ 25
Precondition
Fob Indication
Meaning
Flash Beep
Fob start button is being pressed
Continuous while button is
held down
— The fob is transmitting an RF signal
User attempts to start engine by pressing fob
button twice within 3 sec
1 flash 1 beep Engine start request received
2 flashes 2 beeps Engine started successfully
1 flash every 3 sec — Engine idling
3 flashes 3 beeps Vehicle is in range but engine not started
2 long flashes — Vehicle not in range (engine not started)
Engine idling by remote engine start operation
1 flash every 3 sec — Engine idling
3 flashes 3 beeps
Engine stopped by system timeout or for safety
reasons (see sections above)
User attempts to stop engine by pressing and
holding fob button for at least 2 sec.
3 flashes 3 beeps Engine stopped by user request
1 flash every 3 sec —
Stop request not received. Engine still idling.
Starting and operating/Remote engine start system (dealer option)
– CONTINUED –
7-19
7
To Next Page
Loading...
