Black plate (531,1)
北米Model "A2520BE-A" EDITED: 2015/ 5/ 25
4. Insert a new battery with its positive (+)
side facing upward as shown in the figure.
5. Attach the cover to the access key by
fitting the projections and recesses to-
gether.
& Replacing battery of trans-
mitter
1. Open the key head using a flat-head
screwdriver.
2. Remove the transmitter case from the
key head.
3. Open the transmitter case by releasing
the hooks.
1) Negative (−) side facing up
4. Replace the old battery with a new
Maintenance and service/Replacing battery
– CONTINUED –
11-51
11
To Next Page
Loading...
