Subaru 2016 Outback - Page 69

Black plate (70,1)
北米Model "A2520BE-A" EDITED: 2015/ 5/ 25
Seat, seatbelt and SRS airbags/Child restraint systems
! Legacy
1) Whe n i nstalling on the window-side
seating position
2) When installing on the rear center seat-
ing position
1. Raise the head restraint at the seating
position where the child restraint system is
to be installed with the seatbelt or lower
anchorages.
2. Open the cover flaps to use the
anchorages.
3. Pass the top tether between the head
restraint and seatback.
4. Fasten the top tether hook of the child
restraint system to the appropriate upper
anchorage.
5. Tighten the top tether securely.
! Outback
1) When installing on the window-side
seating position
2) When installing on the rear center seat-
ing position
1. Raise the head restraint at the seating
position where the child restraint system is
to be installed with the seatbelt or lower
anchorages.
2. Adjust the seatback to the upright
position.
3. Pass the top tether between the head
restraint and seatback.
1-40