Subaru 2017 Legacy - Speed Dial List Setup; Registering Contacts to Speed Dial; Managing Full Speed Dial List

SETUP
140
SPEED DIAL LIST SETTING
Up to 15 contacts (maximum of 4 numbers per contact) can
be registered in the speed dial list.
n REGISTERING THE CONTACTS IN THE SPEED DIAL
LIST
1. Select
Add Speed Dial
(Add Speed Dial).
2. Select the desired contact to add to the speed dial list.
● Dimmed contacts are already stored as a speed dial.
3. Check that a conrmation screen is displayed when the
operation is complete.
XWhen 15 contacts have already been registered to
the speed dial list
1. When 15 contacts have already been registered to
the speed dial list, a registered contact needs to be
replaced.
Select
Yes
(Yes) when the conrmation screen
appears to replace a contact.
2. Select the contact to be replaced.
3. Check that a conrmation screen is displayed when the
operation is complete.
XRegistering contacts in the speed dial list in a
different way (from the “Contacts (Contacts)” screen)
1. Display the phone top screen. (→P.118)
2. Select the
Contacts
(Contacts) tab.
docstructure.indb 140 2016/03/30 11:16:09