500
5-2. Steps to take in an emergency
BRZ_EGE
Remove the injection hose from
the valve and screw the valve
core in the valve securely by
turning it clockwise with the
valve core tool.
Attach the sticker as shown.
Remove any dirt and moisture
from the wheel before attaching
the label. If it is impossible to
attach the label, make sure to tell
any authorized SUBARU dealer
or repairer, or another duly quali-
fied and equipped professional
when you have them repair and
replace the tire that sealant is
injected.
Store the kit and then attach the
sticker as shown.
STEP
9
Valve
core tool
Valve core
STEP
10
STEP
11
To Next Page
Loading...
