Subaru BRZ 2021 - Page 503

5
501
5-2. Steps to take in an emergency
When trouble arises
BRZ_EGE
Connect the compressor power
plug to the power outlet.
The push-button ignition switch
must be in “ACC” mode.
Connect the air compressor
hose by threading it on the valve.
Left-hand drive vehicles: Check
the specified inflation pressure.
The label is placed as shown in
the illustration.
Right-hand drive vehicles: Check
the specified inflation pressure.
The label is placed as shown in
the illustration.
Power
outlet
STEP 12
Power plug
STEP 13
Compressor
Hose
STEP 14
STEP 14