4. Install the bulb socket by turning it
clockwise.
5. Install the light cover on the rear gate.
& License plate light
! Sedan
1. Open the trunk and remove the clips
from the trunk lid trim with a flat-head
screwdriver.
2. Turn the bulb socket counterclockwise
and pull out the socket.
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the bulb socket and the trunk
lid trim.
! 5-door models
1. The license plate lights must be
pushed outwards, and then pulled out to
be removed.
2. Turn the bulb socket counterclockwise
and pull out the socket.
Maintenance and service/Replacing bulbs
– CONTINUED –
11-43
To Next Page
Loading...
Need help?
General
