Subaru Forester 2014 - Cruise Control System; Activating and Deactivating Cruise Control; Adjusting Cruise Control Speed

29
Getting
Started
Instrument
Panel
Gauges
Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
Controls
Cruise Control
Increase Speed
Pushupthe“RES/SET”switchtothe
“RES”side;holduntilyourvehicle
reaches the desired speed and release.
To increase speed using the accelerator
pedal, press the pedal until you reach
the desired speed. Push down the
“RES/SET”switchtothe“SET”sideto
set the speed.
Decrease Speed
Pushdownthe“RES/SET”switchto
the“SET”side;holduntilyourvehicle
slows to the desired speed and release.
To decrease the speed using the brake
pedal, press the pedal to release cruise
control temporarily. When the speed
decreases to the desired speed, push
downthe“RES/SET”switchtothe
“SET”sidetosetthespeed.
To activate the cruise control, press the
button. The indicator light on the instrument
panel will turn on. To deactivate cruise control,
press the
button again.
Press the accelerator
pedal until your vehicle
reaches the desired
speed. Push the switch
tothe“SET”sideand
release. Ease off the
accelerator pedal. Your
vehicle will maintain the
desired speed.
To cancel the cruise control, push the
brakepedalorpressthe“CANCEL”
button. If you have a manual transmission,
you can push in the clutch pedal.
SI-DRIVE (if equipped)
To resume your speed after
canceling, push the switch to
the“RES”side.
1353095_14a_Subaru_Forester_QRG_021913.indd 29 2/19/13 9:34 AM