IMPREZA(NA) A1830BE-A (ENGLISH)
Keys and doors
2-26
B Inspection
Perform the following steps at least twice a year to
check the release handle for correct operation.
1. Open the trunk lid.
2. Use a screwdriver with a thin blade. Slide the
screwdriver blade from the slit aperture of the lock
assembly fully to the end until you hear a click.
HBS071BA
This places the latch in the locked position.
HBS072BA
3. Move the release handle, from outside the ve-
hicle, in the direction of the arrow to check if the
latch is released.
HG2018BA
To Next Page
Loading...
