IMPREZA(NA) A1830BE-A (ENGLISH)
7
Starting and operating
7-29
– CONTINUED –
the desired speed.
When the difference between the actual vehicle
speed and the set speed is less than 4 mph (6.8
km/h), the set speed can be increased 1 mph (1.6
km/h) each time by pressing the control lever up-
ward in the “ACCEL, RESUME” direction quickly
within 0.5 second.
OR
1. Depress the accelerator pedal to accelerate the
vehicle to the desired speed.
2. Push the control lever downward in the “SET,
COAST” direction once. Now the desired speed is
set and the vehicle will keep running at that speed
without depressing the accelerator pedal.
NOTE
If the difference between the actual vehicle
speed when the control lever is pushed down-
ward and the speed last time you set is less than
4 mph (6.8 km/h), the vehicle speed will be low-
ered by 1 mph (1.6 km/h). This occurs because
the cruise control system unit regards this lever
operation as that intended to decrease the ve-
hicle speed.
B To decrease the speed
1. Push the control lever downward in the “SET,
COAST” direction and hold it until the vehicle reach-
es the desired speed.
When the difference between the actual vehicle
speed and the set speed is less than 4 mph (6.8
km/h), the set speed can be lowered 1 mph (1.6
km/h) each time by pressing the control lever down-
ward in the “SET, COAST” direction quickly within
0.5 second.
OR
1. Depress the brake pedal to release cruise control
temporarily.
2. When the speed decreases to the desired speed,
press the control lever downward in the “SET,
COAST” direction once. Now the desired speed is
set and the vehicle will keep running at that speed
without depressing the accelerator pedal.
To Next Page
Loading...
