IMPREZA(NA) A1830BE-A (ENGLISH)
Seat, seatbelt and SRS airbags
1-22
HS1021BA
HS1022BA
1. Insert a key or other hard pointed object into the
slot in the connector (buckle) on the right-hand side
and push it in, and the connector (tongue) plate will
disconnect from the buckle.
HG1024BA
2. Allow the retractor to roll up the belt. You should
hold the webbing end and guide it back into the re-
tractor while it is rolling up. Insert the tongue plate
into the belt holder.
CAUTION
D Do not allow the retractor to roll up the seat-
belt too quickly. Otherwise, the metal tongue
plates may hit against the trim, resulting in
damaged trim.
D Have the seatbelt fully rolled up so that the
tongue plates are neatly stored. A hanging
tongue plate can swing and hit against the
To Next Page
Loading...
