Page 3
Safety Precautions
1. Disconnect your amplifier from the AC mains before connecting or
disconnecting speaker cables to reduce risk of electric shock or fire.
2. Do not expose speaker to rain or moisture. Do not place beverages or
potted plants requiring water on top of your speakers.
3. Best placement is in a shaded area as long exposure to direct sunlight
may damage the finish.
4. Do not locate any sensitive electronic devices such as televisions,
magnetic data storage systems, computer equipment, etc., within one
meter of each speaker.
5. The Ribbon tweeter is a highly accurate and dynamic transducer. It is
also very sensitive - NEVER VACUUM the Ribbon Tweeter or blow air onto
the diaphragm of the ribbon tweeter. To do so could damage the ribbon
tweeter. Never do a ‘battery polarity test’ on the ribbon tweeter.
Unpacking
Carefully unpack each speaker — don’t touch the ribbon tweeters! — and
remove all accessory items from the cartons.
Remember to keep all the packaging, to make it easier to transport the
speakers if necessary.
Spikes (for floorstanding speakers) will be included in your carton.
We recommend carefully pivoting speakers into position rather than
sliding them if your floor is prone to scratch.
PM1 MK2 USER MANUAL
To Next Page
Loading...