Installation Information
Model UC-15I (Undercounter Ice Machine)
2-8
#7012423 - Revision B - May, 2011
13. Prepare sanitizer solution and sanitize the ice
machine according to In Place Cleaning/Sanitizing
instructions found in the Installation & Operation
manual.
14. Put one gallon (4 L) of cold water into a container
that will easily pour under the lifted water shutters.
Refer to page 17 to identify water shutters. Open
shutters and add one gallon (4 L) of cold water.
Watch for proper drainage.
15. Press POWER button.
16. At initial start-up, ice machine will need approxi-
mately 30 minutes to freeze ice and up to 5 minutes
to harvest the ice. Wait for first cycle of cubes to
drop to ensure proper installation.
The unit must be allowed to have ventilation through
these fins. The door panel may hang in front of the
fins, but a decorative kickplate must not cover the fins.
It is possible to paint the kickplate another color. Follow
these easy steps:
• Rough up surface to be painted with fine grit sandpa-
per.
• Wipe with alcohol to ensure it is clean and dry.
• Use an appliance or industrial grade, oil base, high
gloss enamel paint.
Do NOT cover the kickplate area
To Next Page
Loading...
Need help?
General
