Need help?Do you have a question about the Suhr RIOT and is the answer not in the manual?
Electrical Specifications| input impedance | 1M ohm |
|---|---|
| output impedance | 600 ohm |
| operating voltage | 4V to 18V (nominal 9V) |
| maximum voltage | 20Vdc |
| current consumption | 8mA |
Battery| power connector | 9Vdc, center negative, 2.1mm x 5.5mm |
|---|---|
| estimated battery life | 75 – 100 hours continuous use |
| reverse battery protection | yes |
| over voltage protection | yes |
Weight and Dimensions| dimensions | 2.50” Width x 4.50” Depth x 1.25” Height |
|---|---|
| weight | 0.75 pound |
Details the Dist, Level, Tone, and 3-position Voicing switch.
Allows remote control of the pedal via the FX Link jack.
Relay-based true bypass for signal integrity and less popping.
LED illuminates Blue when the effect is activated.
Explains how to remotely control the pedal using the FX Link jack.
Monitors internal battery and alerts user when voltage is low.
Details low battery alerts and automatic true bypass activation.
Lists technical details such as impedance, voltage, dimensions, and weight.
Details the warranty terms for electronic products and customer responsibilities.
To Next Page
