Do you have a question about the Suhr Rufus and is the answer not in the manual?
operating voltage | 9 Vdc |
---|---|
maximum voltage | 18 Vdc |
current consumption | 9 mA |
power connector size | 2.1mm x 5.5mm |
---|---|
fx link connector type | 1/8" (TRS) stereo jack |
input impedance | 5k ohm |
output impedance | 10k ohm |
width | 2.50 inches |
---|---|
depth | 4.50 inches |
height | 1.25 inches |
weight | 0.75 pound |
Lists key features like Silicon Transistors, 3-Band EQ, mf(x), FX Link, and True Bypass.
Explains input and output jack connections for instruments and amplifiers.
Details power options: 9V battery or 9VDC center negative supply.
Describes LED flashing for low battery voltage or failure.
Adjusts the amount of Fuzz/Gain, with descriptions for low, medium, and high settings.
Adjusts the overall output level of the pedal.
Adjusts the amount of bass applied to the fuzz effect.
Adjusts the amount of midrange applied to the fuzz effect.
Three-position switch for controlling high frequencies (cut, neutral, boost).
Pedal uses relay-based true bypass to remove effect from signal chain.
Explains the two modes: Green (Normal) and Red (Fat).
Describes using FX Link to remotely control bypass and modes with an external switch.
Setting for pushing an amp into a dynamic rhythm crunch tone at lower settings.
Setting for chunky low gain fuzz, ideal for Classic Rock rhythms.
Setting for Alternative/Grunge-era tones with fat low-end and scooped mids.
Setting for 1970s-era fuzz tones responsive to playing dynamics.
Details input (5k ohm) and output (10k ohm) impedance.
Specifies 2.1mm x 5.5mm center negative connector, 9Vdc operating, 18Vdc max.
9mA current draw, approx. 60 hours battery life.
Provides physical dimensions and weight of the pedal.
Outlines JST's warranty for workmanship and electronic components.
Explains how international customers handle warranty claims via distributors.