Introduction / Table of Contents
2
INTRODUCTION
Congratulations on your purchase of the Extended-Sump U Trough Power Sweep. This product was
designed, built and tested to assure highest quality and maximum life.
Read and study operator’s manual carefully to learn how to safely service and operate your machine.
Failure to do so could cause personal injury or equipment damage.
For easy reference, fill in the following information:
Bin diameter: _____
Drive motor hp: _____
Date of U-Trough purchase: _______________________________
DISCLAIMER: Bin sweeps will vary in performance based on grain condition and condition of bin floor.
Any capacities provided by Sukup Manufacturing Co. are based on dry, clean corn and ideal conditions.
It may take two passes over a given area to remove grain, with a layer of grain remaining on floor
afterward.
TABLE OF CONTENTS
Limited Warranty ........................................................................................................................ 3
Safety ......................................................................................................................................... 4
Dimensions ................................................................................................................................ 8
Preparation / Installation ............................................................................................................10
Sweep Installation Instructions ..................................................................................................13
Attaching Sweep Stop ...............................................................................................................15
Powerhead Options ...................................................................................................................17
Adjusting Belt Tension...............................................................................................................21
Cluster Buster Installation .........................................................................................................22
Operating Instructions ...............................................................................................................24
Troubleshooting ........................................................................................................................25
Lubrication ................................................................................................................................25
Parts/Assemblies ......................................................................................................................26
Quick Reference Parts List (Motors, Pulleys, Bushings) ............................................................43
Contact Information ...................................................................................................................44
To Next Page
Loading...
