SECTION 3 1100E, 1500E, 1800E USER MANUAL
29
3.5 IDENTIFICATION, AIR-COOLED WITH INTEGRAL DRYER
NOTES:
1. Allow 4.00 ft. [1.25 Meters] minimum clearance around
machine for access and free circulation of air.
2. A foundation or mounting capable of supporting the weight of
package, and rigid enough to maintain the compressor frame
level is required. The compressor frame must be levelled and
secured between the frame and the foundation. No piping
loads must be permitted at external connections.
3. All dimensions are ±1/2" [12.7Mm].
4. Recommended incoming customer power supply is shown on
drawing.
5. If ductwork is to be installed for cooling air, high static fan must
be selected. Max allowable additional static pressure 0.4 In
H20 with high static fan.
Main Motor HP Motor Type Weight CFM Cooling Air
15 TEFC 1194 LBS/542 KG 2000 CFM
20 TEFC 1248 LBS/566 KG 2000 CFM
25 TEFC 1323 LBS/600 KG 2000 CFM
To Next Page
Loading...
